Skip to content
English
Contact us
  • There are no suggestions because the search field is empty.

Firmware Update: DCB41 & DCB41-DS Version 8

Debut ConneX DCB41 & ConneX Adsum DCB41-DS Firmware Update 8 – Sleep Mode Toggle

Overview:

Firmware Update 8 adds the ability to enable or disable the automatic sleep mode on your Debut ConneX DCB41 speakers.

Default Behavior:

  • Sleep mode is enabled by default.
  • The system enters sleep mode after 15 minutes of no signal.

How to Toggle Sleep Mode:

  1. Press and hold the “LED” button on the remote for 3 seconds.
  2. LED flashes RED – Sleep mode is disabled.
  3. Press and hold again for 3 seconds.
  4. LED flashes GREEN – Sleep mode is enabled.

Note: The system remembers your last setting even after powering off.

Download Firmware Update

 

Firmware Update Procedure

 

ConneX Upgrade-resized
Prepare USB Drive
  1. You will need a USB drive smaller than 8 GB, and it needs to be formatted to FAT32 file system. 
  2. Download latest firmware update ZIP file.
  3. Uncompress the ZIP file, and copy update files onto the ROOT DIRECTORY of the USB Drive. Note: There are a total of 4 files that must be copied directly to the USB Root Directory—they cannot be in a folder.

    Apply the Update
  4. Turn off unit and unplug power cable. Wait 2 minutes for power to discharge.
  5. **Important** During the upgrade, do not remove the USB drive as it can cause the unit to become bricked. Please be careful!
  6. Insert the USB drive into the USB update port on back of speaker.
  7. Plug power cable into unit and turn on AC power.
  8. Update will start automatically. LED will flash white to indicate update is in progress. If the upgrade is successful, the LED will flash white/green.
  9. After update is complete, remove power cable.

  10. **Important** Wait 2 minutes before removing USB drive and plugging in power cable, or you may lose update.